5HF 10-R

Type 5HF / 5HFP Quick-acting Fuse Series (High -Breaking Capacity) 5HF/5HFP Series, 5x20mm Ceramic Tube Quick-acting Fuse RoHS Compliant Description 5x20mm quick-acting, high breaking capacity, ceramic body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 1. Features - High breaking capacity (250V ac @1500A) - Meet IEC standard 60127-2, sheet 1 - Wide operating temperature range - Bulk and Tape & Reel packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Ceramic Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”F”, ”Current Rating”, “H”,”250V”, "Appropriate Safety Logos", ”  ”（ RoHS compliant） Marking On Label : "bel", "5HF”or”5HFP", ”F”, "Current Rating",“H”, "Voltage Rating", "Interrupting Rating","Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics(IEC-127-2 STANDARD SHEET 1) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MAX 400mA to 3.15A 1 30 10 2 3 300 20 4A to 6.3A 1 30 10 3 3 300 20 8A to 12A 1 30 40 20 10 1000 30 hr. min. ms sec ms ms ms In clause 9.2, the test voltage for 5HFP ratings from 1A to 6.3A is 63VDC. Safety Agency Ampere Rating/ Voltage Rating Safety Agency Certificate Ampere Range / Volt @ I.R. ability* 1907483 1A-10A/250V AC@1500A 40000506 1A-6.3A / 250V AC@1500A E20624 400mA-10A LR39772 400mA-10A/250V AC@1500A /250V AC JET1037-31003-1008 JET1037-31003-1009 Self-declaration No: 2020970207000019 1A-5A/250V AC@1500A 400mA-10A/250V AC@1500A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5HF / 5HFP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B. (260+/-5℃, 10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Voltage and Interrupting Ratings Agency Approvals Maximum Melting I²T Melting I²T Power